6
Environmental Operating Conditions
The mixer must operate in the following conditions:
Indoors
•
Altitudes up to 2000 m (6500 ft.).
•
Temperatures from 5 degrees C to 40 degrees C (41 degrees F to 104 degrees F).
•
Maximum relative humidity 80% for temperatures up to 31 degrees C (88 degrees F) decreasing linearly to 50%
relative humidity at 40 degrees C (104 degrees F).
•
Pollution degree 2.
Installation Instructions
Unpacking and Assembly
1. Always use the designed hand grips to lift the mixer.
2. Slide fingers of one hand into the front hand grip pocket.
3. Wrap the fingers of other hand around the rear hand grip.
4. Carefully lift with the mixer weight equally balanced between both hands.
The packaging can be re-used for mixer and accessory storage.
CAUTION / WARNING
Always hold by the two hand grips, supporting the mixer until securely mounted on an appropriate fixture. Mixer not intended
for hand held operation.
CAUTION / WARNING
Mixer has a maximum recommended tilt and angle (forwards and backwards) of +/- 25 degrees and a maximum recom-
mended rotation angle (side to side) of +/- 15 degrees. The mixer can be used outside of the recommended limits for short
periods of time. Prolonged use beyond the recommended angle reduces the lubrication of internal transmission compo-
nents and could result in permanent damage.
Mounting the Mixer
Four mounting bolts located on the bottom of the mixer allow for secure attachment to an appropriate stand or fixture. The
holes are arranged in an 87.6 mm (3.45 in) square pattern with M6 threaded holes. Use the provided hardware and 5 mm
hex key to tighten or loosen bolts.
Lock Washer - 4 required (included)
Flat Washer - 4 required (included)
Assembly Screw - 4 required (included)
