background image

 

 

Introduction: 

We are really pleased that you have chosen our high quality product of Digital Automatic Coffee / 

TEA BREWER, and we are very sure that you have made a correct decision. Before your use it, 

please read the following instructions carefully. 

 

 

Warnings: 

 

 

This appliance is only suitable for commercial usage. 

 

The coffee maker has to be placed in a horizontal position and connected to the ground 

terminal. 

 

This coffee maker is a professional type appliance; it must be operated by trained 

professional personnel. 

 

The appliance is only to be installed in locations where its use and maintenance is restricted 

to trained personnel. 

 

Remain in the vicinity of the machine while machine is in operation. 

 

Never immerse the machine in the water. If the machine has been soaked, it must be dried 

and checked by specialist before using it again. 

 

Don’t disconnect appliance with wet hand and don’t pull the power cord. 

 

The power cord should be replaced by qualified person with specified type, please contact 

the service agent for further advice. 

 

When the machine is in use, some parts of the machine will become very hot. Ensure the 

line of cord does not touch the hot parts. The user should also be careful not to touch the hot 

parts. 

 

Keep the unit away from the children. 

 

Children under the age of 18 years should be supervised to ensure they do not play with the 

appliance. 

 

Appliances can be used by persons 18 years and above with reduced physical, sensory or 

mental capabilities or lack of experience and knowledge if they have been given supervision 

or instruction concerning used of the appliance in a safe way and understands the hazards 

involved. 

 

For proper operation, this appliance must be installed where the temperature is       
between 41

  to 95

  (5

  to 35

). 

 

Machine must not be immersed for cleaning. 

 

This appliance must not be cleaned by pressure washer. 

 

If the power cord is ever damaged, it must be replaced by the manufacturer or authorized 

service personnel with a special cord available from the manufacturer or its authorized 

service personnel in order to avoid a hazard. 

 

All electricians must provide electrical service as specified in conformance with all local and 

national codes. 

 

The units must away from locate of water sprayed area. 

 
In case,

 

if any incorrect on operates or water over flow, Please 

TURN-OFF 

the 

power switch immediately to 

STOP

 the brewing procedure. 

 

Caution! Hot Surface!

 

Содержание AI Series











Отзывы: