7
Quick menu
Three quick menus setting
【
A
】
【
B
】
【
C
】
, which build-in the factory default setting of
temperature and water out mode. In addition to the built-in three quick menus, there is a hiding
recipe in the setting button which can be regarded as
【
D
】
. The user can free setting: water out
temperature, water volume, Pulse Brew volume, Pulse Brew time and etc.
The machine can be configured up to three hot plates by models, corresponding to the hot plates
illustration and used as needed.
【
A
】
190.4
℉
degree Non-Stop dripping. Water out volume is depended on the choice that
made at that time. For example, at
【
A
】
mode
choose “Full Capacity”
Press the Brew
button, the brewing programing for this time is: at 190.4
℉
degree, non-stop dripping 202oz.
+
+
+
【
B
】
197.6
℉
degree Non-Stop dripping. For example, at
【
B
】
mode
no choose “Half” or
“Full” Capacity
Press the Brew button, the brewing programing for this time is: at 197.6
℉
degree, non-stop dripping 125oz.
+
+
+
【
C
】
203
℉
degree Non-Stop dripping. For example, at
【
C
】
mode
choose “Half” Capacity
Press the Brew button, the brewing programing for this time is: at 203
℉
degree, non-stop
dripping 101oz.
+
+
+
【
D
】
Hiding menu. For example, at
【
D
】
mode
no choose “Half” , “Full” capacity,
【
A
】
,
【
B
】
,
【
C
】
mode
Press the Brew button, the brewing programing for this time is: at 185
℉
degree, non-stop dripping 125oz. (Factory default value is 185
℉
degree.)
+
+
Under
【
A
】
,
【
B
】
,
【
C
】
mode, the users may change their parameters from quick menu per their
request which is to press
【
A
】
or
【
B
】
or
【
C
】
and hold on 2 seconds, the system will lead the
users enter the setting status. Then, the users can set any parameters according to the screen
indication. The new setting parameters will replace the factory defaults setting after complete
setting procedure.
If no choose
【
A
】
,
【
B
】
,
【
C
】
mode, there is a hiding recipe in the setting button which can
be regarded as
【
D
】
. The users may set any parameters per their demands at D mode which is
to press and hold 3 seconds and enter to the setting procedure.