INSTALLATION AND SERVICE MANUAL for AVALON
Gourmet
49
www.cafection.com
(800) 561-6162
AVALON Gourmet rev. 7 2013/04
Servicing Parts
7.2
Shutdown / Storage
Should you need to store this brewing equipment for an extended period of time, follow this procedure to
avoid any risk of injury or damage to the equipment.
1. Turn the unit off and unplug form the power outlet;
2. Drain the hot water tank (see instructions in section 7.1);
3. Empty the soluble canisters and the 3 beans canister;
4. Clean all parts of the unit before storing (see cleaning instructions in section 5)
5. Disconnect the white wire from the heating element (see installation diagram 6.3)
6. Tie down the water level switch’s arm with a “tie-wrap” to keep the float from pulling down on
the switch during transportation. Do not overtighten, this may damage the switch; this
is simply to keep the float from bouncing upand down on the switch.
7.2.1 Storing the brewer assembly
The brewer is the heart of equipment and is responsible for the taste of the cup of coffee. It is
therefore important that you store it properly when it is not in the brewer. Always disengage
your brewer cam by using a pair of pliers and turning the pin located on the back clockwise
until the brew chamber lifts up. This will release the pressure on the screen and seal. Your
brewer must be on its back or its left side while on a table top. Do not sit the brewer on its right
side (wheels and yoke) or straight up as these positions are not sturdy and could cause it to
fall.
