AVALON Gourmet rev. 7 2013/04
www.cafection.com
(800) 561-6162
50
INSTALLATION AND SERVICE MANUAL for AVALON
Gourmet
Annex
08-03-2010
GOLAB01
Installing the water flow restrictor
Step 3
Step 4
*If you have software version Gourmet 4.10 or above do not attempt Step 5.
Programming Tips
STEP 1
Locate the milk whipper bowl.
STEP 2
Remove the whipper bowl. Move it up to disconnect it
and then pull.
STEP 3
Insert the flow restrictor in the water entry. Push all the
way in. It should be a tight fit.
STEP 4
Reinstall the bowl. Make sure the outside of bowl is clean
and apply milk label on the bowl.
STEP 5
Programming the water value
On the main board press “SETUP”
On the keyboard press
1-“Hot Water”
2-
“Caffelate”
Press “Start” until you get to:
“Setup water qty ing2”
“Cafelatte”
“Water SMALL format 000”
*If you are still using the factory setting you will need to
set 120 to keep the same water level.
Refer to the programming tips to know how to scroll and
move around the programming menu.
Annex 1 Installing water flow restrictor on the milk whipper
