Caen V2495 Скачать руководство пользователя страница 26

Страница: 26 / 62

CAEN

Electronic Instrumentation

UM5175

–

V2495/VX2495 User Manual rev. 1

Driver and Software Installation

8.1

Drivers

To communicate with the board using one of the available communication buses, specific drivers should be installed on
your host device.



Note:

to ensure the best system performance, it is recommended to have always the latest drivers release installed.

Direct USB Driver

In order to communicate with the V2495 through the front panel USB interface (see Chap.

), the related driver can be

downloaded from the V2495 webpage in the

Software/Firmware

tab (

login required

The USB driver is provided for Windows and Linux OS.

➢

WINDOWS OS

A step-by-step driver installation procedure is given next.



Note:

The procedure is based on a Windows 10 system. It may be slightly different for another Windows OS.

Download and unpack the driver installation package on the host PC.

Plug the USB cable on the V2495 and on the PC. Windows should detect the new hardware.

Go to the

Device Manager

area. The new hardware is listed in

Other devices

as “V2495” (see

Fig. 2.1

Fig. 8.1:

V2495 hardware detection

Содержание V2495































































Результаты поиска

Содержание V2495

Отзывы:

Похожие инструкции для V2495

Бренды по названию

Популярные бренды

Caen V2495, Руководство пользователя

Результаты поиска

Содержание V2495

Отзывы:

Похожие инструкции для V2495

Бренды по названию

Популярные бренды