Caen N1419, Руководство пользователя

Страница: 33 / 37

CAEN
Electronic Instrumentation
UM2619 – N1419 User Manual
33
Meaning of Board Alarm bits
Bit Function
Bit 0 → CH0 1 : Ch0 in Alarm status
Bit 1 → CH1 1 : Ch1 in Alarm status
Bit 2 → CH2 1 : Ch2 in Alarm status
Bit 3 → CH3 1 : Ch3 in Alarm status
Bit 4 → PWFAIL 1 : Board in POWER FAIL
Bit 5 → OVP 1 : Board in OVER POWER
Bit 6 → HVCKFAIL
1 : Internal HV Clock FAIL (
≠
200±10kHz)
SET commands related to the Channels
The following table contains the strings to be used to handle set commands related to the Channels.
The ' X ' in the Field 'Channel' can be set to the ' 0..(N-1)' values.
7
When ' X=N ' the command is issued to all Channels.
String Function (Units)
$BD:xx,CMD:SET,CH:X,PAR:VSET,VAL:XXXX.X Set VSET value
$BD:xx,CMD:SET,CH:X,PAR:ISET,VAL:XXXX.XX Set ISET value
$BD:xx,CMD:SET,CH:X,PAR:MAXV,VAL:XXXX Set MAXVSET value
$BD:xx,CMD:SET,CH:X,PAR:RUP,VAL:XXX Set RAMP UP value
$BD:xx,CMD:SET,CH:X,PAR:RDW,VAL:XXX Set RAMP DOWN value
$BD:xx,CMD:SET,CH:X,PAR:TRIP,VAL:XXXX.X Set TRIP time value
$BD:xx,CMD:SET,CH:X,PAR:PDWN,VAL:RAMP/KILL Set POWER DOWN mode value
$BD:xx,CMD:SET,CH:X,PAR:IMRANGE,VAL:HIGH/LOW Set IMON RANGE value
8
$BD:xx,CMD:SET,CH:X,PAR:ON Set Ch ON
$BD:xx,CMD:SET,CH:X,PAR:OFF Set Ch OFF
SET commands related to the module
String Function (Units)
$BD:xx,CMD:SET,PAR:BDILKM,VAL:OPEN/CLOSED Set Interlock Mode
$BD:xx,CMD:SET,PAR:BDCLR Clear alarm signal
7
N is the number of channels
8
parameter 'IMRANGE' can be changed only on modules featuring IMON zoom (optional)