Caen N1419, Руководство пользователя

Страница: 17 / 37

CAEN
Electronic Instrumentation
UM2619 – N1419 User Manual
17
Local Control
Insert the unit inside a powered NIM crate, and switch it ON. At the power the Display shows for a few seconds the
following screen.
Fig. 13: Welcome screen
At this point the module is ready to be operated locally. The TUNE ROTARY SWITCH (see p.10) is lit up as long as
Local Control is enabled.
HV connection
Verify the channels polarity (polarity setting is explained at p. Errore. Il segnalibro non è definito. ) checking that the
polarity LEDs are switched on according to the programmed configuration (see p.10); verify the HV_EN/OFF/KILL 3
POS. SWITCH of each channel is set to OFF; the Display will show the following message in the left lower row:
Fig. 14: Channel OFF status screen
now connect the HV cable linking the outputs to the loads to be supplied and enable the HV outputs switching the
HV_EN/OFF/KILL 3 POS. SWITCH in the HV_EN position; the Display will show the following message in the left
lower row:
Fig. 15: Channel ON status screen
The KILL position of the HV_EN/OFF/KILL 3 POS. SWITCH allows to turn off the module at the fastest available rate;
the Display will show the following message in the left lower row:
Fig. 16: Channel KILL status screen