Document type:
Title:
Revision date:
Revision:
User's Manual (MUT)
A3486 3Phase 400Vac to 2x2kW/1x4kW 48Vdc
08/10/2007
10
NPO:
Filename:
Number of pages:
Page:
00120/04:A3486.MUTx/10 A3486_REV10.DOC
35
23
Fig. 3.1 – Ventilation-warning Label
This product must be installed by qualified personnel; in order to be
CE compliant it requires 3-phase EMC filter type EPCOS B84143-A16-
R105 on the mains supply cable; this filter does not support
operation in hostile areas (magnetic field).
3.3.5 AC
source
The Mod. A3486 ACsource is as follows:
The input voltage range and current required is specified in § 2.2. Ensure that under
heavy load, the AC voltage supplied to the unit does not fall below the specifications
described in § 2.2.
3.3.6
3-phase power supply cable
The power supply cable to be connected to the MAIN connector (see § 2.4.2.1) is
configured as follows (see also figure):
EARTH : green-yellow cable
L1: black cables N°1 & N°2
L2: black cables N°3 & N°4
L3: black cables N°5 & N°6
Connector type:
Harting 09.12.007.3001
Hood:
Harting 19.20.003.1440
Contacts:
Harting 09.15.000.6201
Coding pin Female:
Harting 09.12.000.9902
Cable:
113408 LTZE-Superfelx PLUS-N-PUR suitable to 15A@400V
The Protective Earth Ground must be connected
before applying AC Power to the unit
