FAST-PS-M – User’s Manual
33
4.
Local Control
This chapter describes the local control functionalities that are provided by the
FAST-PS-M power supply and some useful information on how to use it.
The power supply can work either in LOCAL mode or in REMOTE mode. The
control mode (LOCAL or REMOTE) can be set on the configuration page of the local
display. Remote control is discussed in the “Remote Control Manual” and in the
“VISUAL Manual”.
4.1
Navigation Switch
Each FAST-PS-M power supply module is equipped with a Navigation Switch
on the front panel of the unit as shown in the following
Figure 16
:
Figure 16:
Navigation switch
There are multiple actions that can be performed via this front navigation switch:
•
Left, Right, Up, Down arrow pushbuttons;
•
Internal encoder rotation (CW and CCW);
•
Central pushbutton (it will also be referred to as “Enter”).
