
Cadillac User Experience (GMNA-Localizing-U.S./Canada-11434397) - 2018 -
crc - 5/2/17
44
REAR SEAT INFOTAINMENT
the video screen display and start the
disc. The infotainment system can
also turn on the video screen display.
Caution
Storing the remote controls in a hot
area or in direct sunlight can
damage them, and the repairs
would not be covered by the vehicle
warranty. Storage in extreme cold
can weaken the batteries. Keep the
remote controls stored in a cool,
dry place.
Battery Replacement
To change the remote control
batteries:
1. Insert a coin or key to pull up
the rear cover on the remote
control.
2. Replace the two AAA batteries in
the compartment.
3. Replace the battery cover.
Remove the batteries from the remote
control if it will not be used for an
extended period of time.
Video Voice Over
If equipped, the RSI system has a
Video Voice Over feature to benefit
the visually and hearing impaired.
When activated, the RSI will read
aloud menu titles, menu listings,
pop-ups, alerts, and file titles from
audio and video media. Titles with
gibberish, special characters,
or foreign text may not be read aloud.
Use one of the following to turn Video
Voice Over on or off:
.
Select Video Voice Over from the
Front Display menu.
.
Select Video Voice Over from the
RSI menu.
.
Press and hold the Remote Control
Menu and Play/Pause buttons for
five seconds.
Video Voice Over will remain active
over ignition cycles until it is
turned off.
RSI Troubleshooting
No power :
The ignition might not be
in ON/RUN or ACC/ACCESSORY.
The picture does not fill the screen.
There are black borders on the top
and bottom or on both sides, or it
looks stretched out :
Press MENU on
the remote control to change the
display mode setting.
The remote control does not work :
Check to make sure the remote
control is programmed to the correct
screen. Make sure there is no
obstruction between the remote
control and the transmitter window
and check the batteries to make sure
they are not dead or installed
incorrectly.
There is no sound from the
headphones with the indicator light
on :
If the batteries are good, make
sure the headphones are programmed
to the correct screen and on the
correct channel for the screen being
viewed.
The HDMI source is running but
there is no picture or sound :
Check
that the RSI video screen is in the
HDMI mode by pressing MEDIA on
the remote control. Check the HDMI
connections at both devices.