Black plate (59,1)
Cadillac Escalade Owner Manual (GMNA-Localizing-Europe-7132796) -
2014 - CRC - 7/12/13
Vehicle Care
10-59
If the spare tyre does not lower
to the ground, the secondary
latch is engaged causing the
tyre not to lower. See
Secondary
Latch System on page 10-66
for
more information.
7. Use the wheel wrench hook that
allows you to pull the hoist cable
towards you, to assist in
reaching the spare tyre.
8. Tilt the tyre toward the vehicle
with some slack in the cable to
access the tyre/wheel retainer.
Separate the retainer from the
guide pin by sliding the retainer
up the pin while pressing down
on the latch.
Once the retainer is separated
from the pin, tilt the retainer and
pull it through the centre of the
wheel along with the cable and
latch.
9. Put the spare tyre near the
flat tyre.
Removing the Flat Tyre and
Installing the Spare Tyre
1. Do a safety check before
proceeding. See
If a Tyre Goes
Flat on page 10-55
for more
information.
2. To remove the centre cap, place
the chiselled end of the wheel
wrench in the slot on the wheel
and gently pry the cap out.