Black plate (58,1)
Cadillac Escalade Owner Manual (GMNA-Localizing-Europe-7132796) -
2014 - CRC - 7/12/13
10-58
Vehicle Care
J.
Hoist End of Extension Tool
K. Spare Tyre Lock
1. To reach the hoist shaft access
cover (C), you will first need to
remove the hitch cover. Remove
it by turning the two fasteners
located at the bottom of the
cover anticlockwise and then
pull the cover down and rotate
towards you.
2. Open the hoist shaft access
cover (C) on the bumper to
access the spare tyre lock (K).
3. To remove the spare tyre lock
insert the ignition key, turn it
clockwise and then pull the
lock out.
4. Assemble the two jack handle
extensions (D) and wheel
wrench (E) as shown.
5. Insert the open end of the
extension (J) through the hole in
the rear bumper (I) (hoist shaft
access hole).
Be sure the hoist end (J) of the
extension (D) connects to the
hoist shaft (B). The ribbed
square end of the extension is
used to lower the spare tyre.
6. Turn the wheel wrench (E)
anticlockwise to lower the spare
tyre (H) to the ground. Continue
to turn the wheel wrench until
the spare tyre can be pulled out
from under the vehicle.