Black plate (29,1)
Cadillac CTS/CTS-V Navigation System - 2014 - crc - 6/21/13
Infotainment System
29
Depending on the USB mass
storage device, some devices may
not be recognised. The HUB device
is not supported.
USB Playback
Music can be played directly from
the USB device and controlled
through the radio's MP3 control
functions and the Music Navigator.
USB Media Recording
A USB Mass Storage device such
as a
“
pen drive
”
or a portable USB
hard drive can be connected to the
USB port to record media contents,
such as compressed audio files
from the USB storage device onto
the HDD. The USB port is in the
centre console, between the
accessory power outlet socket and
the auxiliary input jack.
In addition to recording the content
from the USB storage device,
content can be played back directly
from the USB device.
USB Background Recording
If the content of a USB device is
chosen to be copied, these media
files are copied to the hard drive.
The recording process occurs in the
background and does not affect
playback from any source, including
the USB device itself. The quality of
the listening experience should be
the same whether recording in the
background or not, and the speed of
the recording process does not take
any longer than normal.
Timeshift cannot be activated during
the background recording function.
Using the Radio Controls to
Connect and Control
Your iPod
®
An iPod can be controlled using the
radio buttons and knobs and display
your iPod song information on the
radio's display. To connect and
control an iPod using the radio
controls, the vehicle must have a
USB port. If equipped, it is in the
centre console. A special iPod
connection cable is needed. If it was
not purchased with the vehicle, see
your dealer for more information.
This feature supports the following
iPod models:
.
Fifth generation or later iPod
.
First or Second generation or
later iPod nano
®
*For proper operation, make sure
the iPod has the latest firmware
from Apple
®
. The iPod firmware can
be updated using the latest iTunes
®
application. See www.apple.com/
itunes.
To connect and control the iPod,
connect one end of the special iPod
connection cable that came with the
vehicle to the iPod's dock
connector. Connect the other end to
both the USB port and the auxiliary
input jack. The USB port and the
auxiliary input jack are in the centre
console. The iPod music displays
on the radio's display and begins
playing through the vehicle's radio
system.
