Black plate (21,1)
Cadillac CTS/CTS-V Navigation System - 2014 - crc - 6/21/13
Infotainment System
21
buttons search playlists (Px) first
and then go to the root folder. When
the radio displays the name of the
folder the radio displays DISC.
Order of Play
Tracks are played in the following
order:
.
Play begins from the first track in
the first playlist and continues
sequentially through all tracks in
each playlist. When the last
track of the last playlist has been
played, play continues from the
first track of the first playlist.
.
If the CD does not contain any
playlists, then play begins from
the first track under the root
directory. When all tracks from
the root directory have been
played, play continues from files
according to their numerical
listing. After playing the last
track from the last folder, play
begins again at the first track of
the first folder or root directory.
When play enters a new folder, the
display automatically shows the new
folder name. The new track name
displays.
File System and Naming
The song name that displays is the
song name contained in the file.
If the song name is not present in
the file, then the radio displays the
file name with the extension (such
as .mp3) as the track name.
Preprogrammed Playlists
Preprogrammed playlists that were
created by WinAmp
®
, MusicMatch
®
,
or Real Jukebox
®
software can be
accessed; however, there is not
editing capability. These playlists
are treated as special folders
containing compressed audio song
files.
Playing an MP3
With the ignition on, insert an MP3
CD partway into the slot, label side
up. The player pulls it in and the
MP3 should begin playing. While
playing an MP3, the navigation
system is available. If an MP3 is
inserted with the system off and the
ignition on, it starts to play.
When an MP3 CD is inserted, the
MP3 tab activates.
If the ignition or radio is turned off
with an MP3 CD in the player, it
stays in the player. When the
ignition or radio is turned on, the
MP3 CD starts playing where it
stopped, if it was the last selected
audio source.
As each new track starts to play, the
track number displays.
If an error displays, see
“
CD/DVD
Messages
”
previously in this
section.
If viewing a map screen, press the
MP3 screen button. The display
splits between the audio screen and
the map screen. If no split screen is
wanted or if not on a map screen,
press the AUDIO control button,
then press AUDIO until MP3 is
selected or press the MP3 screen
button.
