Cadel WALL3 PLUS, Руководство по установке

Страница: 28 / 31

WALL -TILE - MOON - LEAN
28
Fig. 61 - Shutter with fuses to remove
Proceed as follows:
• Remove the frame (see the dedicated chapters).
• After these operations you can have access at the following components: geared motor, ignition plug, ambient fan, fume fan,
ambient probe, fume probe, thermostat, electronic board, pressostat.
• For cleaning or replacemente of the auger it is necessary to unscrew the three bolt of the geared motor and to extract it, un-
screw the two screws lying under the geared motor (vedi
Fig. 62
), of the auger, remove the hand rejector inside the hopper
and then unscrew the inner bolt of the auger. (vedi Fig. 63 ).To assembly proceed at the contrary.
Fig. 62 - Remove the screws Fig. 63 - Remove the screw
9.2 CE MARKING
The CE marking with the stove information is located under the stove’s right side panel (see Fig. 64 ).
Fig. 64 - CE marking position