Cadel SATURNO 16, Руководство по установке

Страница: 9 / 44

9
SATURNO
• Old chimney flue with an inserted pipe of minimum Ø100/120 mm and with an external door which enables the chimney
cleaning.
Fig. 8 - Example 3
LEGEND Fig. 8
1
Insulating material
2 Inspection plug
3 Minimum safety distance = 0,5 mt
• External chimney flue entirely made up of insulated stainless steel pipes, i.e. with double wall of minimum Ø100/120 mm: all
must be firmly attached to the wall. For chimney against wind effects please (see
Fig. 4
).
• Ducting system through T-unions which enables an easy cleaning without disassembling the pipes.
We recommend to check with your chimney flue manufacturer the safety distances which must be respected
and the type of insulating material. The aforesaid regulations are valid also for holes made on the wall (EN
13501 - EN 13063 - EN 1856 - EN 1806 - EN 15827).
4 COMBUSTION AIR
4.1 EXTERNAL AIR INLET SATURNO
It is mandatory to provide an adequate external air inlet that supplies the combustion air required for the product to work pro-
perly. The flow of air between the outside and the installation room may be direct, through an inlet in an external wall of the
room (preferable solution see Figure 9 a), or indirect, via air intake from adjoining rooms and connecting permanently with the
installation room (see Figure 9 b). Adjoining areas may not include sleeping areas, bathrooms, garages or general areas with a
fire hazard. During installation it is required to check the minimum clearances required to draw air from outside. Take into account
the presence of doors and windows that may interfere with the proper flow of air to the stove (see diagram below). The air intake
must have a minimum total net area of 80 cm2: the surface must be increased accordingly if other active generators (for example:
electric fan for stale air extraction, kitchen hood, other stoves, etc.), which may cause negative pressure in the room, are installed.
Make sure that, with all appliances on, the pressure drop between the room and the outside does not exceed the value of 4 Pa
(also for Oyster appliances if the combustion air has not been suitably ducted outside). If required, increase the intake section of
the air inlet, which must be made at floor level and always protected with a bird-proof outer protection grid and in such a way that
it cannot be obstructed by any object.