Cadel SATURNO 16, Руководство по установке

Страница: 23 / 44

23
SATURNO
13 RIGHT CHUTE SIDE ASSEMBLY SATURNO
When opting for side chute installation, the distance from the machine axis to the wall must be 68.2 cm maximum (picture on the side).
To position the chute, proceed as follows:
• Connect the pipe supplied to Vivo 80 Pellet ensuring it is rotated to the side, and fasten it with the clamp.
• Connect the pipe (in the top section) to the mouth of the hatch structure using the supplied clamps.
• Position the pipe with the hatch structure so that, when cladding is completed, it may be screwed and fixed to the wall of the
cladding on the hole made for its insertion.
To mount the outer hatch refer to the suitable paragraph, since this operation will be performed with completed cladding.
14 SMOKE OUTLET CONNECTION SATURNO
When making the hole for the passage of the smoke discharge pipe, one must take into account the possible presence of flam-
mable materials. If the hole must be made through a wooden wall or thermolabile material, the INSTALLER MUST first of all use
the appropriate wall fitting (minimum diameter 13 cm) and suitably insulate the pipe of the product that passes through it using
adequate insulating materials (1.3 - 5 cm thick with minimum thermal conductivity 0.07 W/m°K).
The same minimum distance must be applied if the pipe of the product must pass through vertical or horizontal sections near the
thermolabile wall.
It is recommended to use an insulated double-wall pipe in external sections in order to prevent condensation from forming.
The combustion chamber works in negative pressure.