Cadel SATURNO 16, Руководство по установке

Страница: 12 / 44

SATURNO
12
5.2 PREPARATION AND UNPACKING SATURNO
The product is supplied in a single package. Open the package, remove the accessories, any straps, cardboard and polystyrene and
take the appliance off the pallet. To remove the product from the pallet you must extract the movable part of the insert and take
out the four Phillips screws securing it to the pallet. Once the insert has been taken out, before removing the screws, it is advisable
to place a support “A” under the movable part of the insert so as to work safely (the “B” support is supplied).
Fig. 13 - Removal 1 Fig. 14 - Removal 2
Fig. 15 - Removal 3 Fig. 16 - Removal 4
The appliance must always be carried upright, taking care with its moving parts. Pay particular attention to the door and its glass,
protecting them from mechanical impact that would compromise their integrity.
The product must always be handled with care. If possible, unpack the product near the place of installation. The packaging mate-
rials are neither toxic nor harmful, and therefore no particular disposal measures are required. Therefore, the end user is responsi-
ble for product storage, disposal or possible recycling in compliance with the relative applicable laws in force. If the product must
be connected to an exhaust pipe that goes through the rear wall (to enter the flue), make sure not to force it in.