LEGENDA
WHERE TO DISPOSE
MATERIALS
D. ELECTRIC AND ELECTRO-
NIC COMPONENTS
To be disposed of separately in authorised centres, as
indicated in the WEEE directive 2012/19/EU and the
relative national transposition.
Wiring, motors, fans, circulators, display panels, sen-
sors ignition plug, electronic cards, batteries.
E. METAL STRUCTURE
To be disposed of separately with metal -
F. COMPONENTS THAT CAN-
NOT BE RECYCLED
To be disposed of with mixed waste
E.G.: Gaskets, rube piping, silicone or fibres, plastic.
G. HYDRAULIC COMPONENTS
Piping, fittings, expansion vessel, valves. If there are
any, to be disposed of separately based on the mate-
rial they are made of:
Copper
Brass
Stainless steel
Other materials
INSTRUCTIONS FOR PACKAGING DISPOSAL
The material that the appliance’s packaging is made of must be managed correctly, in order to make collection, reuse, recovery
and recycling easier, where possible.
The table below illustrates the possible components that the packaging is made of, and the relative instructions for correct dispo-
sal.
DESCRIPTION
CODE MATERIAL
SYMBOL
DIRECTIONS FOR COLLECTION
- WOOD BED
- WOOD CAGE
- WOOD PALLET
WOOD
FOR 50
SORTED waste collection
WOOD
Check with the competent body on
how to dispose of this packaging at
the recycling depot
- CARDBOARD BOX
- CARDBOARD CORNER
- CARDBOARD SHEET
CORRUGATED CARDBOARD
PAP 20
SORTED waste collection
PAPER
Check the instructions of the compe-
tent body
- APPLIANCE BAG
- BAG OF ACCESSORIES
- BUBBLE WRAP
- PROTECTIVE SHEET
- LABELS
POLYETHYLENE
LD PE 04
SORTED waste collection
PLASTIC
Check the instructions of the compe-
tent body
- POLYSTYRENE
- FOAM PEANUTS
POLYSTYRENE
PS 6
SORTED waste collection
PLASTIC
Check the instructions of the compe-
tent body
- STRAP
- TAPE
POLYPROPYLENE
PP 5
SORTED waste collection
PLASTIC
Check the instructions of the compe-
tent body.
- SCREWS
- STAPLES FOR STRAP
- FASTENING BRACKET
IRON
FE 40
SORTED waste collection
METAL
Check with the competent body on
how to dispose of this packaging at
the recycling depot
