11
IDROSTUFE
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Feed screw loading” using the arrows.
• Press “menu” to confirm.
• Select “Enable” with the + - keys.
• Press “menu” to confirm and “esc” to exit.
d - Tones
This function is disabled by default, so to enable act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “tones” using the arrows.
• Press “menu” to confirm.
• Select “On” with the + - keys.
• Press “menu” to confirm and “esc” to exit.
e - External thermostat (see relative chapter)
EXTERNAL THERMOSTAT (not included with the boiler, it is the user’s responsibility)
The stove can also be temperature-controlled by an external room thermostat. It is positioned centrally with respect to the room
where the appliance is installed and ensures greater consistency between the heating temperature requested of the stove and the
actual temperature the stove supplies.
Connect the wires from the external thermostat to points 1-2 on the stove terminal board.
Once the thermostat is connected, it must be enabled.
Do so as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows.
• Select by pressing “menu”.
• Scroll once again to “External thermostat” using the arrows.
• Select by pressing “menu”.
• Press the - + buttons.
• Select “On” to activate the external thermostat.
• Press the “menu” button to confirm.
• Press the “esc” button to exit.
f - Auto-Eco activation
To select the Auto-Eco function act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Auto-Eco” using the arrows.
• Press “menu” to confirm.
• Select “On” with the + - keys.
• Press “menu” to confirm and “esc” to exit.
g - Eco Shutdown t
To select the Eco - shutdown t function act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Eco - shutdown t” using the arrows.
• Press “menu” to confirm.
• Enter the minutes with the + - keys.
• Press “menu” to confirm and “esc” to exit.
