![Cadel IDRO PRINCE 3 12 Скачать руководство пользователя страница 45](http://html1.mh-extra.com/html/cadel/idro-prince-3-12/idro-prince-3-12_installation-use-and-maintenance-manual_3358876045.webp)
IDRO PRINCE
3
12-16-23-23 H
2
O - IDRO PRINCE 30-30 H
2
O - AQUOS
3
16-23-23 H
2
O - IDRON 16-22 AIRTIGHT - MIRA 16-22 - TESIS 16-23 AIRTIGHT - HIDROFIRE 22.8
45
NOTE: Some of the items listed above cannot be activated in certain “system configurations”.
a - Language
To select the language act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “language” using the arrows.
• Press “menu” to confirm.
• With the + - keys select the language of interest (IT/EN/DE/FR/ES/NL/PL/DA)
• Press “menu” to confirm and “esc” to exit.
b - Cleaning
To select “Cleaning” (only when the boiler is switched off) act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Cleaning” using the arrows.
• Press “menu” to confirm.
• Select “On” with the + - keys.
• Press “menu” to confirm and “esc” to exit.
c - Feed screw loading
Allows to fill the pellets loading system. It can only be activated with the boiler switched off, it displays an 180” countdown after
which the feed screw stops automatically, as when exiting the menu.
To select “Feed screw loading” (only when the boiler is switched off) act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Feed screw loading” using the arrows.
• Press “menu” to confirm.
• Select “Enable” with the + - keys.
• Press “menu” to confirm and “esc” to exit.
d - Tones
This function is disabled by default, so to enable act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “tones” using the arrows.
• Press “menu” to confirm.
• Select “On” with the + - keys.
• Press “menu” to confirm and “esc” to exit.
e - External thermostat (see relative chapter)
EXTERNAL THERMOSTAT (not included with the boiler, it is the user’s responsibility)
The stove can also be temperature-controlled by an external room thermostat. It is positioned centrally with respect to the room
where the appliance is installed and ensures greater consistency between the heating temperature requested of the stove and the
actual temperature the stove supplies.
Connect the wires from the external thermostat to points 1-2 on the stove terminal board.
Once the thermostat is connected, it must be enabled.
Do so as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows.
• Select by pressing “menu”.
• Scroll once again to “External thermostat” using the arrows.
• Select by pressing “menu”.