Cadel FRAME3 Скачать руководство пользователя

Страница: 22 / 32

FRAME - QUASIMODO - MODO Airtight

• Start the stove and set "Set flame" to power 1 (the start-up time of this stove lasts between 8 and 10 minutes to ensure mini-

mum draught).

• Compare the read values with those on the table.

• Change power every 10 minutes and wait for it to stabilise.

• Access the user menu and, if necessary, change the parameters.

Fig. 49 - Frame

cap removal

Fig. 50 - Frame

digital pressure switch connec-

tion

Fig. 51 - Modo At and Quasimodo

Up digital

pressure switch connection

DATA

Stove depression -

temperature 9 kW

18/19 Pa - 110°C

28/29 Pa - 135°C

38/39 Pa - 152°C

42/43 Pa - 176°C

47/48 Pa - 192°

NB: for good combustion, the depression values must be b -5 Pa and the temperature values b - 10°C.

SPECIAL MAINTENANCE

7.1

INTRODUCTION

For a long working life of the stove, have a periodic cleaning of the stove as described in the following paragrafs.

• Fume outlet pipes (fume c chimney flue + chimney pot) must always be cleaned, scrubbed and checked by an autho-

rized technician in compliance with local regulations, with the instructions of the manufacturer and those of your insurance

company.

• If there are no local regulations and no instruction from your insurance company, it is necessary to have your fume pipe, chim-

ney flue and chimney pot cleaned at least once a year.

• It is also necessary to have the combustion chamber, motors and fans cleaned and to have the gaskets and the electronical

elements checked at least once a year.

All these operations must be planned in time with your Autorized Technical Assistance Service.

• After a long ineffective time, before turning on the stove check if there are obstructions in the fume exhaust.

• If the stove had been using continuously and intensely, the whole system (chimney included), must be cleaned and checked

more frequently.

• In case of replacement of damaged pieces please ask for the original spare part at the Autorized Retailer.

7.2

FEED SCREW MAINTENANCE

Proceed as follows for the feed screw maintenance:

Содержание FRAME3

































Результаты поиска

Содержание FRAME3

Отзывы:

Похожие инструкции для FRAME3

Бренды по названию

Популярные бренды

Cadel FRAME3, Руководство по установке

Результаты поиска

Содержание FRAME3

Отзывы:

Похожие инструкции для FRAME3

Бренды по названию

Популярные бренды