Cadel FRAME3 Скачать руководство пользователя

Страница: 21 / 32

FRAME - QUASIMODO - MODO Airtight

6.13 ELECTRIC CONNECTION

Warning: the appliance must be installed by an authorized technician!

• The electric connection occurs through a cable with plug put in an electric socket which is able to support charge and tension

specific of every model, as described in the technical datas table (see

FEATURES a pag. 29

• The plug must be easily accessible when the appliance is installed.

• Please further assure you that your network is endowed with an efficient earth connection: if it does not exist or if it is not

efficient, please endow you with one in compliance with the law.

• Connect the supply cable first on the back of the stove (see

Fig. 46

and

Fig. 47

) and then at a wall electric socket.

Fig. 46 - Electric socket with master switch

Fig. 47 - Plug connected

• Do not use extension cables.

• If the feeder cable is damaged, it must be replaced by an authorized technician.

• When the stove is not going to be used for a long period of time, it advisable to remove the plug from the socket on the wall.

• An electrical connection to a UPS/ACCUMULATOR/ STABILISER must guarantee a voltage of at least 210 V without power

surges. Considering the variety of UPS on the market regarding size and construction qualities, we cannot guarantee operation

once the stove is connected to these devices.

6.14 CONNECTION TO THE EXTERNAL THERMOSTAT

Fig. 48 - Graphic display

The stove works through a thermostat probe placed in its inner. If you desire, the stove can be connected to an external room

thermostat. This operation must be executed by an authorized technician.

Connect the wires from the external thermostat to the "Term opt" terminal on the stove board. Activate the external thermostat

(default setting OFF) as indicated below:

• Press the "

menu

" button.

• Scroll with the arrows to "

Settings

• Select by pressing "

menu

• Scroll with the arrows again to "

Ext.Thermostat

• Select by pressing "

menu

• Press the

- +

buttons.

• To activate the external thermostat select "

• Press the "

menu

" button to confirm.

6.15 STOVE CALIBRATION AND DEPRESSION MEASUREMENT

This stove has a pickup point positioned on the tank in order to measure the depression of the combustion chamber and verify its

proper operation.

To do this, proceed as follows:

• Connect a digital pressure switch with a tube to detect the negative pressure (see

Fig. 49

and

Fig. 50

Fig. 51

• Load the feed screw via appropriate function.

Содержание FRAME3

































Результаты поиска

Содержание FRAME3

Отзывы:

Похожие инструкции для FRAME3

Бренды по названию

Популярные бренды

Cadel FRAME3, Руководство по установке

Результаты поиска

Содержание FRAME3

Отзывы:

Похожие инструкции для FRAME3

Бренды по названию

Популярные бренды