Cadel FRAME3, Руководство по установке

Страница: 16 / 32

FRAME - QUASIMODO - MODO Airtight
16
6.7 REMOVE SIDE PANELS MODO AIRTIGHT / QUASIMODO
3
UP
Proceed as follows to remove the stove side panels:
Fig. 22 - Remove the screws Fig. 23 - Unhook the side
• Loosen the 2 screws (see
Fig. 22
).
• Release the 2 teeth on the bottom of the side panel and remove it (see Fig. 23 ).
6.8 DOOR ADJUSTMENT
To centre the door, proceed as follows:
Fig. 24 - Door adjustment
• Open the door.
• Loosen the two front screws in the upper hinge and, using the side screw (the one circled in the picture) adjust the door
forward or backward (see
Fig. 24
).
• Once the door is centred, lock the 2 front screws.
6.9 AIR REGULATOR
The stove is fitted with a removable rear air regulator.
The stove is regulated according to the flue data and pellet used, as per the technical features (see
FEATURES a pag. 29
).
If the data does not match, the authorised technician can increase the stove draft by removing/loosening the ring located inside
the air inlet pipe (see
Fig. 25
).