Cadel FRAME3 Скачать руководство пользователя

Страница: 11 / 32

FRAME - QUASIMODO - MODO Airtight

A sealed installation does not consume the room’s oxygen because it draws all the air from the outer environment (if suitably

ducted) and makes it possible to install the product in all houses that require a high degree of insulation such as “passive” or “high

energy efficiency” houses. Thanks to this technology there is no risk of smoke emissions in the room and no air inlets - hence not

even the relevant ventilation grilles - are required in the installation premises.

Consequently, there will be more draughts of cold air in the room, thus making it more comfortable and increasing the overall

efficiency of the system. The sealed stove in a sealed installation is compatible with the presence of forced ventilation or premises

that might have negative pressure with respect to the outside.

6.2

MINIMUM DISTANCES

Observe the distances from flammable objects (sofas, furniture, wood panelling, etc..) as specified in the following diagram.

If objects considered to be particularly sensitive to heat are present, such as furniture, curtains or sofas, as a precaution, increase

the stove clearances substantially to avoid possible deterioration due to the effect of heat.

Fig. 11 - Safety distances from combustible material.

.LEGENDA

Fig. 11

dR (rear distance)

200 mm

dS (side distance)

300 mm

dB (lower distance)

15 mm

dC (upper distance)

750 mm

dP (front radiation)

1000 mm

dF (floor radiation)

1000 mm

dL (side radiation)

1000 mm

FLOOR

FRONT FLAMMABLE MATERIAL

AREA SUBJECT TO RADIATION

FLOOR GUARD

RADIATED SURFACE TO BE PROTECTED

REAR/SIDE/UPPER FLAMMABLE SURFACE

If the floor is made of combustible material, use a protection made of non-combustible material (steel, glass...) that also protects

the front from any falling combusted material during cleaning operations.

Always fit a floor guard if the floor is made of flammable material.

Install the stove also detached from any non-combustible walls/surfaces, observing a minimum clearance of

200mm

(back) and

300mm

(side) to allow effective aeration of the appliance and a good distribution of heat in the room.

In any case, ensure adequate distance to facilitate access during cleaning and extraordinary maintenance. If this is not possible, it

must still be possible to distance the product from adjacent walls/elements.

This operation

(1*)

must be performed by a technician qualified to disconnect the combustion product expulsion ducts and their

Содержание FRAME3

































Результаты поиска

Содержание FRAME3

Отзывы:

Похожие инструкции для FRAME3

Бренды по названию

Популярные бренды

Cadel FRAME3, Руководство по установке

Результаты поиска

Содержание FRAME3

Отзывы:

Похожие инструкции для FRAME3

Бренды по названию

Популярные бренды