Cadel FRAME3, Руководство по установке

Страница: 18 / 32

FRAME - QUASIMODO - MODO Airtight
18
6.11 FRAME
3
HOT AIR DUCTING (OPTIONAL)
WITH THE INSTALLATION OF THE DUCTING, IT IS NECESSARY TO LOAD THE NEW DATABASE IN THE BOARD (DA-
TABASE NO. 07).
SEE “SERVICE MANUAL”.
By default, the insert inserts the hot air into the environment from both the front vents.
It is possible to channel the left air on the back of the stove, through a ducting kit.
To assemble the kit, proceed as follows
• Remove the 4 fixing screws of the left fan (see
Fig. 27
and
Fig. 28
).
• Remove the fan.
Fig. 27 - Remove the screws Fig. 28 - Remove the screw
Proceed as follows to assemble the casing to the fan:
• Tighten the flange to the fitting (see Fig. 29 ).
• Fix the fitting to the fan (see
Fig. 30
and
Fig. 31
).
Fig. 29 - Fix the flange to the fitting Fig. 30 - Fix the fitting to the fan Fig. 31 - Fix with screws
• Fix the casing cover to the fan as in Fig. 32 .
• Assemble everything to the casing and fix it with the screws (see
Fig. 33
and
Fig. 34
).