CAC / BDP 8kW, Руководство пользователя

Страница: 96 / 116

Table of Contents ................................Inside Front Cover
Section 1 — General Information ............................... IFC
1.1 Introduction.......................................................... IFC
1.2 Battery Charger Compatibility ................................. 1
1.2.1 Determination of Generator/Transfer
Switch Model Type ........................................ 1
Section 2 — Load Shed Transfer Switch
Installation ....................................................2
2.1 Load Shed Transfer Switch (RTSS) Installation ...... 2
2.1.1 Wiring and Connections at the
Transfer Switch ............................................. 2
2.1.2 Wiring and Connections at the Generator ...... 2
2.1.3 Operational Testing ....................................... 2
Section 3 — Standard or Service Entrance Transfer
Switch Installation ......................................3
3.1 Standard Transfer Switch (RTSN) or (RTSE) Service
Entrance Rated Transfer Switch Installation ........... 3
3.1.1 Wiring and Connections at the
Transfer Switch ............................................. 3
3.1.2 Charger Mounting.......................................... 4
3.1.3 Wiring and Connections at the Generator ...... 5
3.1.4 Operational Testing ....................................... 6
Section 4 – GenReady Installation .................................6
4.1.1 Wiring and Connections at the
Transfer Switch ............................................. 6
4.1.2 Charger Mounting.......................................... 7
4.1.3 Wiring and Connections at the Generator ...... 7
4.1.4 Operational Testing ....................................... 8
Section 5 – Interconnection Diagrams ..........................9
Section 6 – Notes .............................................................16
1.1 INTRODUCTION
This battery charger supplies a trickle charging cur-
rent and voltage to maintain the charge on the gen-
erator starting battery inside the generator enclosure.
The charger will not replenish a fully discharged bat-
tery. It is intended to be connected to a 120VAC gen-
erator backed-up circuit only. If it is not connected
to a generator backed-up circuit the battery could go
“dead” while the generator is running for extended
periods of time.
Figure 1.1 — Charger as Supplied Indicating
Input and Output Wiring
DC Output AC Input

This battery charger must be properly installed
and wired for correct operation of all 2008
model line Air-cooled Standby Generators.
Failure to do so will result in a dead battery
condition at the generator.
NOTE:
This installation guide should be used in conjunc-
tion with the “Installation and Owner’s Manual”
that is furnished with the Air-cooled Standby
Generator and the Installation and appropriate
transfer switch manual. Please review all manuals
prior to installation of the generator and transfer
switch. This battery charger is not required with
the Liquid-cooled Generator product line. This
battery charger is not required for Air-cooled
Standby Generators prior to the 2008 model line.
This unit is not compatible with other generator
manufacturer’s products.
Table of Contents
For authorized service, reference
the dealer locator number found
in the generator owner’s manual
or on the generator.