CAC / BDP 8kW, Руководство пользователя

Страница: 100 / 116

4
Section 3 — Standard or Service Entrance Transfer Switch Installation
Battery Charger Installation Guidelines
Figure 3.3 — RTSN Fuse Block Installation When
Completed
Figure 3.4 — RTSE Fuse Block Installation T1
Connection
Figure 3.5 — RTSE Neutral Connection
Figure 3.6 — RTSE Fuse Block Installation When
Completed
3.1.2 CHARGER MOUNTING
‹
1. Remove the cover over the controller in the gen-
erator
2. The battery charger can be located anywhere
within the controls area on the generator. It is
convenient to mount the charger on the verti-
cal surface on right-hand side of the controller
(Figure 3.7).
3. Clean the surface where the charger is to be
mounted prior to mounting with a damp cloth
and wait for the area to dry.
4. Remove the adhesive covering on the backside
of the charger and firmly press the charger into
place as shown. Once mounted the charger may
be removed for inspection by separating the hook
& loop mounting (Figure 3.8).