CAC / BDP 8kW, Руководство пользователя

Страница: 101 / 116

5
Figure 3.7 — Mounting Location of Charger in
Generator
Charger Mounting
Figure 3.8 — Removal of Adhesive Covering on
Hook and Loop for Mounting
3.1.3 WIRING AND CONNECTIONS AT THE
‹
GENERATOR
1. Identify the DC output wires on the battery char-
ger and crimp spade lugs onto both the positive
and negative lead (purchased or supplied sepa-
rately) (see Figure 1.1).
2. Attach the positive and negative battery charger
leads to the terminal strip in the controller. The
positive lead is either a red wire or is marked with
a (+) or (15B) designation. The negative lead is
black and/or marked with a (-) or (0) designation.
The positive lead attaches to the terminal labeled
“15B”. Note that there will be two wires attached
to the “15B” terminal when the full installation
is completed. One for the battery charger and
one for the common connection to the transfer
switch. The negative lead attaches to the terminal
labeled “0” (Figure 3.9).
Figure 3.9 — Connection of Charger DC Output
Wires in Generator Control Panel
3. Using wire nuts attach the 120VAC input wires
from the battery charger to the generator backed-
up 120VAC circuit from the transfer switch
(Figure 3.10).
Figure 3.10 — Connection of Charger AC Input
Wires in Generator Control Panel
4. Dress all wires neatly (Figure 3.11).
Figure 3.11 — Completed Charger Connections
on Generator Control Panel
Section 3 — Standard or Service Entrance Transfer Switch Installation
Battery Charger Installation Guidelines