INSTALLING THE CONCENTRATOR MODULE
3-4
3. Secure the module to the MMAC by tightening the knurled
knobs. Failure to firmly secure the MIM may result in improper
operation.
4. Power on the MMAC chassis by plugging the AC power cord
into the wall outlet.
Figure 3-2 Installing the Concentrator Module
3.4
CONNECTING LOBE CABLING
Prior to connecting cables, check that the pinouts and maximum
cable lengths throughout the system conform to the requirements
described in Chapter 2, Installation Requirements/Specifications.
The physical lobe connection from the concentrator module to the
token ring station does not require the use of a crossover cable. The
TCU and token ring station connectors are wired such that the
transmit pair from the concentrator module connects to the receive
pair in the station and the receive pair from the concentrator
TRMM
MMAC
KNURLED
KNOBS
BOARD SLOT
CONCENTRATOR
MODULE
TRMIM-22A
ACTIVE UTP
TOKEN RING