manualshive.com logo in svg

Cabletron Systems TRMIM-22A, Руководство по установке, Страница: 24 / 36

Поделиться
Скачать
Cabletron Systems TRMIM-22A Скачать руководство пользователя страница 24

REQUIREMENTS/SPECIFICATIONS

2-12

LNK

 - Link Status (Green - 12 or 24), when lit, indicates that the 

associated station is providing phantom current. If the port has 
been made a Ring-Out port by the MMAC management module, 
the LNK LED stays lit even with no connection.

MGMT 

- Management (Green) when lit, indicates that the 

concentrator module is in Management Mode. Settings are stored 
by the management module in slot 0.

2.3.5

General Specifications

SAFETY

Warning: 

It is the responsibility of the person who sells the system to 

which the TRMIM-22A/TRMIM-24A/TRMIM-42A/TRMIM-44A will 
be a part to ensure that the total system meets allowed limits of conducted 
and radiated emissions.

This equipment is designed in accordance with UL478, UL910, NEC 
725-2(b), CSA, IEC, TUV, VDE Class A, and meets FCC part 15, 
Class A limits.

SERVICE

TRMIM-22A/42A

TRMIM-24A/44A

MTBF (MHBK-217E)

48,000 hrs.

50,000 hrs.

MTTR

<0.5 hr.

<0.5 hr.

PHYSICAL

Dimensions

13.4D x 11.5H x 2.0W inches 

(includes front panel)

(34.0D x 29.2H x 5.1W centimeters)

Weight

2 lbs. 2 oz.
(963.9 grams)

Содержание TRMIM-22A





































Отзывы:

Нет отзывов