CHAPTER 6: MIB NAVIGATOR
Page 6-4
EMME USER’S GUIDE
MIB Navigator command conventions are as follows:
•
To abort the output or interrupt a process the escape character is ^C
(where ^ equals the Control key).
•
A slash (/) proceeding an OID issues that command from the root
directory regardless of where you are in the MIB. If no slash precedes
the OID the command issues from your current MIB location.
•
Dot notation (1.1.1.1) is equivalent to slash notation (1/1/1/1). Use
slash notation with the navigational commands, and the dot notation
with the built-in commands that are using SNMP to access and manage
network devices.
MIB Navigation Commands are listed in the format shown below:
command:
Syntax:
This entry provides the format that the MIB
Navigator command requires. It indicates
where arguments, if any, must be specified.
Description:
This entry briefly describes the command and
its uses.
Options:
This entry lists any additional fields which may
be added to the command and their format.
Example:
This entry shows an example of the command.
