MIB NAVIGATOR COMMAND SET OVERVIEW
EMME USER’S GUIDE
Page 6-3
6.3
MIB NAVIGATOR COMMAND SET OVERVIEW
There are three categories of commands in the command set.
•
Navigation Commands - Allow the user to access and manage the
MIB for the device running the MIB Navigator. Some of these
commands also provide user community-string information. The
commands are as follows:
•
Built-In Commands - Allow the user to access and manage network
devices connected to the device running the MIB Navigator. The
commands are as follows:
•
Special Commands - Allow the user to exit from the MIB Navigator.
The commands are as follows:
6.3.1 Conventions for MIB Navigator Commands
This manual uses the following conventions for denoting commands:
•
Information keyed by the user is shown in
this
helvetica font.
•
Command arguments are indicated by two types of brackets:
-
required arguments are enclosed by [ ].
-
optional arguments are enclosed by < >.
– branch
– cd
– ctron
– dir
– get
– ls
– mib2
– next
– pwd
– set
– show
– su
– tree
– whoami
– arp
– defroute
– netstat
– ping
– snmpbranch – snmpget
– snmpset
– snmptree
– traceroute
– done
– quit
– exit
