CSX7000 41
M
ONITORING
S
YSTEMS
Administration through BCVision
You will be presented with a warning prompt, asking you to Acknowledge or Disable Notification. To
enable the feature, select Acknowledge. This response closes the warning screen and enables the
system to continue with alarm notification whenever an alarm condition occurs.
To disable the feature, select Disable Notification. This response closes the warning screen,
displays the Alarms Disabled message at the bottom of the screen, and prevents further alarm
notifications.
Set Refresh Rate
The refresh rate determines how often each IES is polled by the BC Supervisor over the data
highway, and how often the BCVision display is refreshed.
To modify the refresh rate, select Set Refresh Rate from the Supervisor Menu. The rate may range
from 1 to 60 seconds. The default is two seconds.
Set SNMP Status Trap Rate
SNMP is an option. If you have SNMP, you may set the status trap rate through this selection.
This status trap rate is initially set to zero.
F
UNCTIONS
M
ENU
The options available from the Functions Menu include:
•
Set Poll Interval
•
Set Reboot Timeout
•
Set Temperature Threshold
•
Set Date and Time
•
View IES Detail
•
View BC Processors
•
Setup
•
Scan Data Highway
•
Mark All
The first three menu items (Set Poll Interval, Set Reboot Timeout, and Set Temperature Threshold)
will apply to each marked IES. (See
page 38
). If no IES is marked, the function will apply to the
currently highlighted IES.
Press <Esc> to exit the menu.
Set Poll Interval
To monitor status, the IES is constantly polling each processor module in the subsystem. The
default poll interval is one second.
If an application is running on a processor module which keeps interrupts disabled for more than
one second, the IES detects a processor failure. EMS will automatically reset the processor (which
is not recommended), or display Inactive on the status screen.
