Cabletron Systems 9C300-1, Руководство пользователя

Страница: 34 / 52

9C300-1 Environmental Module Operation
3-20
The Module Selection Screen
Select <MODULES> from the Main Screen, Figure 3-13, to display the chassis slot
locations in which modules have been installed.
• Line 1, Figure 3-23, displays the screen heading.
• Lines 2 and 3 list all modules in the SmartSwitch 9000 by slot number.
Figure 3-23. The Module Selection Screen
Select <EXIT> to return to the main System Screen.
The Module Specific Screen
Select a module on the Module Selection Screen, Figure 3-23, to display
configuration information on the Module Specific Screen, Figure 3-24.
• Line 1 identifies the selected module by chassis slot location, current status,
and hardware revision. A module’s status can be one of the following:
ON-LINE The host processor is operational.
DOWN The host processor is not operational.
FAULT The power-up diagnostic tests have failed.
• Lines 2 and 3 display a firmware revision and SMB-1 firmware revision, along
with the BOOT PROM revision and the module serial number.
• Line 4 lists the following three submenus. Access a specific submenu by
selecting it on the screen.
<ENV>
Accesses the Module Environment Screen, showing
environmental parameters for the selected module.
<MEMORY>
Accesses the Module Memory Screen, showing the amount of
various memory categories on the module.
<BACKPLANE>
Accesses the Module Backplane Screen, showing backplane
configuration parameters.
<EM> <1> <2> <3> <4> <5> <6> <7>
<EXIT>
MODULE SELECTION
<8> <9> <10> <11> <12> <13> <14>