manualshive.com logo in svg

Cabletron Systems 9C300-1, Руководство пользователя

Поделиться
Скачать
Cabletron Systems 9C300-1 Скачать руководство пользователя страница 31

3-17

9C300-1 Environmental Module Operation

The Environment Screen

Select <ENV> from the System Screen, Figure 3-15, to view environmental 
parameters of the SmartSwitch 9000.

•

Line 1, Figure 3-18, displays the external temperature of the current chassis in 
both Fahrenheit and Celsius, and qualifies the temperature as COLD, COOL, 
NORM (normal), WARM, or HOT, based on system parameters.

•

Line 2 displays the current system non-condensing humidity level, qualified as 
STATIC RISK, NORM (normal), or MOIST, based on system parameters.

•

Line 3 displays the current fan speed of the Environmental Module cooling 
system as a percentage of maximum rotational velocity.

 

Figure 3-18. The Environment Screen

Select <EXIT> to return to the System Screen.

The Communications Screen

Select <COM> from the System Screen, Figure 3-15, to access SmartSwitch 9000 
chassis communication port status information.

•

Line 1, Figure 3-19, displays the status of the Ethernet Port Interface Module 
(EPIM) as either ENABLED, DISABLED or N/A (if not installed).

•

Line 2 displays the Port Administration status of COM port 1 (enabled or 
disabled), the application in use (such as Local Management (LM), SLIP, PPP 
or UPS), the baud rate of the attached device (a VT100-type terminal or 
modem) and the port operational status (active or inactive).

•

Line 3 displays the Port Administration status of COM port 2 in the same 
manner as described for line 2.

CHASSIS EXTERNAL TEMP xxx°F xx°C NORM

CHASSIS HUMIDITY xxx% NORM

FAN SPEED 1 xxx% 2 xxx% 3 xxx% 4 xxx%

<EXIT>

Содержание 9C300-1





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды