manualshive.com logo in svg

Cabletron Systems 9C300-1, Руководство пользователя

Поделиться
Скачать
Cabletron Systems 9C300-1 Скачать руководство пользователя страница 33

3-19

9C300-1 Environmental Module Operation

The Diagnostic Results Screen

The Diagnostic Results Screen, Figure 3-21, displays the results of failed tests for 
the modules selected on the Diagnostic Screen. 

•

Line 1 displays the module(s) selected for diagnostics.

•

Lines 2 and 3 display failed test results, or, if no failures occurred, the message 
ALL DIAGNOSTICS TESTS HAVE PASSED.

 

Figure 3-21. The Diagnostic Results Screen

Select <MORE> to view more failed tests for the current module.

Select <EXIT> to return to the Diagnostic Module Selection Screen.

The BBU Screen

Select <BBU> from the System Screen, Figure 3-15, to view the status of the 
Battery Backup Units (BBUs). Figure 3-22 shows the BBU Screen.

•

Line 1 displays the screen heading.

•

Line 2 displays BBU status (CHARGING, STANDBY or DISCHARGING) if 
BBUs are installed; however, if no BBUs are installed, the message NO BBU 
INSTALLED displays. 

•

Line 3 displays the estimated amount of system run time stored in the BBUs if 
the system is running on a standard power source, or, if the system is running 
on BBUs, the amount of system run time remaining in the BBUs at the current 
power load. 

Figure 3-22. The BBU Screen

Select <EXIT> to return to the System Screen.

Test Results (Left Blank if all pass)

<MORE> <EXIT>

MODULE xx

or ALL MODULE DIAGNOSTICS TESTS HAVE PASSED

BBU CHARGING 

<EXIT>

BATTERY STATUS

SYSTEM RUN TIME AT PWR LOSS xxx MINUTES

Содержание 9C300-1





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды