manualshive.com logo in svg

Cabletron Systems 9C300-1, Руководство пользователя

Поделиться
Скачать
Cabletron Systems 9C300-1 Скачать руководство пользователя страница 29

3-15

9C300-1 Environmental Module Operation

The System Screen

Select the <SYSTEM> option field in line 4 of the Main Screen, Figure 3-13, to 
access the System Screen, Figure 3-15. This screen displays information specific to 
the SmartSwitch 9000 chassis. Lines 1 and 2 display the SmartSwitch 9000 chassis 
Internet Protocol (IP) address and Media Access Control (MAC) address.

Line 3 displays the current chassis hardware revision and serial number.

Line 4 lists the following five submenus. Access a specific submenu by selecting it 
on the screen.

<PWR>

 

Displays general power supply configuration information, with the 
option to view statistics on specific power supply modules. 

<ENV>

Displays environmental information about the chassis.

<COM>

Displays statistics and information about the front panel COM ports and 
EPIM on the Environmental Module.

<DIAGS>

Displays the results of power-up or restart diagnostic tests.

<BBU>

Displays status of BBUs, if they are installed.

Figure 3-15. The System Screen

Select <EXIT> to return to the Main Screen.

The Power Screen

Select <PWR> from the System Screen, Figure 3-15, to access information about 
the chassis power supply configuration. 

•

Line 1, Figure 3-16, displays the number of power supplies currently 
configured and the availability of power redundancy. 

•

Lines 2 and 3 display the power supply status as either ON, OFF DUE TO 
MANAGEMENT, or FAULT.

•

Line 4 is used to access information about a specific power supply module by 
selecting a power supply number. 

CHASSIS MAC ADDRESS xx-xx-xx-xx-xx-xx

<PWR> <ENV> <COM> <DIAGS> <BBU> <EXIT>

CHASSIS HW REV xxx SN xxxxxxxxxxxx

CHASSIS IP ADDRESS xxx.xxx.xxx.xxx

Содержание 9C300-1





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды