Cabletron Systems 9A426-01, Руководство пользователя

Страница: 27 / 50

2-11
Preparing and Installing the 9A426-01 Module
Table 2-1. Function of DIP Switch
Switch Function Description
8
Clear
Password
1
When toggled, this switch clears user-entered
passwords stored in NVRAM, and restores the
default passwords. Once the passwords are
reset, you can use the defaults or enter new
passwords.
7
Clear
NVRAM
2
The module uses NVRAM to store user
entered parameters such as IP addresses,
device name, etc. To reset these parameters to
the factory defaults, toggle this switch. Once
reset you can use the defaults or enter new
parameters that are stored in NVRAM when
the module is powered down, and remain
there until the switch is toggled again.
6
Force BootP
Download
Toggling this switch after pulling the board out
of the
SmartSwitch 9000
, clears download
information from NVRAM and forces image
files to be downloaded from the station
connected to the EPIM on the Environmental
Module configured to act as that module’s
B
OOT
P server.
5 Reserved
For Factory Use Only
4 Reserved
For Factory Use Only
3 Reserved
For Factory Use Only
2 Reserved
For Factory Use Only
1 Reserved
For Factory Use Only
1
Do not toggle Switch 8 unless you intend to reset the user configured passwords
to their factory default settings.
2
Do not toggle Switch 7 unless you intend to reset the user parameters to the
factory default settings.
!
CAUTION