manualshive.com logo in svg

Cabletron Systems 6SSRM-02, Инструкция по установке и эксплуатации, Страница: 71 / 74

Поделиться
Скачать
Cabletron Systems 6SSRM-02 Скачать руководство пользователя страница 71

Starting CoreWatch

Installing and Starting Cabletron CoreWatch

4-5

Starting CoreWatch in Windows NT or Windows 95/98

To start CoreWatch in the Windows NT or Windows 95/98 environment:

1.

Select the Start menu, choose Programs, choose Cabletron Systems CoreWatch, and then 
choose CoreWatch. The Login Dialog dialog box appears.

Note:

If you installed the program in a startup folder other than Programs > Cabletron 
Systems 

CoreWatch, select that folder from the Start menu and then select CoreWatch.

2.

Type the name or IP address and community string for the SmartSwitch. If you do not know 
this information, see your network administrator.

3.

Click OK.

Starting CoreWatch from within SPECTRUM Enterprise Manager

SPECTRUM Enterprise Manager is Cabletron Systems’s flexible and scalable network 
management platform based on leading-edge, object-oriented, adaptive modeling technology. 
SPECTRUM, which is available on Solaris and Windows NT, provides a suite of bundled 
applications as well as additional optional applications. The SmartSwitch is modeled in 
SPECTRUM using the SmartSwRtrGIGASwRtr model type. The SmartSwitch can be 
Auto-Discovered or manually created in a SPECTRUM Topology View and then copied to an 
Organization and/or Location View.

To Start CoreWatch from within SPECTRUM:

1.

Start SPECTRUM.

2.

If you know the topology location for your SmartSwRtrGIGASwRtr model, proceed to that 
location. Otherwise, open the Find View by choosing the View menu, selecting New View, 
and then selecting Find. Select Model-Type Name and enter the SmartSwRtrGIGASwRtr 
command to display all the SmartSwRtrGIGASwRtr models or select Network Address to 
display a particular model.

3.

Bring up the menu for the SmartSwRtrGIGASwRtr model and select CoreWatch. 

This starts CoreWatch using the SmartSwRtrGIGASwRtr model's network address and 
community name.

Содержание 6SSRM-02











































































Отзывы:

Нет отзывов