M o d e l i n g
M o d e l i n g U s i n g t h e C h a s s i s I P
S p e c t r u m E n t e r p r i s e M a n a g e r
Page 66
S m a r t S w i t c h 6 0 0 0
7
See
Positioning the Chassis Device Icon
,
below, to properly locate the automatically
created chassis Device icon.
Positioning the Chassis Device
Icon
Some of the modeling procedures described above
automatically create a chassis Device icon. This
icon can be copied into a Room Location view.
1
Create a Room Location view using Steps 1
through 10 in
Modeling Using the Chassis IP
(page 63)
.
2
To locate the chassis Device icon, activate the
Topology view and select
View > New View >
Find
.
3
Copy the chassis Device icon into the Room
Location view as follows:
a
Within the Find view, select
File > Edit
.
b
Select
6C105
.
c
From the Edit menu, select
Copy
.
d
Access the Room Location view and select
File > Edit
to enter the Edit mode.
e
Select
Paste
.
The icon appears in the Room Location view.
f
Exit the Edit mode.
