D e v i c e V i e w s
C h a s s i s D e v i c e V i e w
S p e c t r u m E n t e r p r i s e M a n a g e r
Page 28
S m a r t S w i t c h 6 0 0 0
you select Admin via the E1 Repeater label, the
Repeater Port labels associated with E1 (i.e., Ports
1 through 12) will display the administrative
status.
Repeater Port Labels
The 6E123-50 and 6E133-49 modules have 10
Mb repeater ports while the 6H123-50 and
6H133-37 modules have the capability of
switching ports between 10 Mb and 100 Mb
repeaters. For example, a 6H133_37 model would
have three 100 Mb repeater models, but
depending on the configuration, it might have six
repeater models, three at 10 Mb and three at 100
Mb. The CsRipEnetRptr application is used for all
these modules for either 10 Mb or 100 Mb
support.
The Chassis Module Icon provides Repeater Port
labels, which allow you to perform repeater port
management. The views accessible from the
Repeater Port label Icon Subviews menu are listed
in
Table 9
.
Table 9:
Repeater Port Label Icon Subviews
Repeater Port Number
Shows an index number identifying a particular
repeater port.
Repeater Port Status
Indicates the port activity status.
The Repeater Port Frame & Error Breakdown view
and Repeater Port Frame Size & Protocols view
provide pie charts and tables that are similar to
what is described for the
Repeater Frame & Error
Breakdown View (page 27)
and the
Repeater
Frame Size & Protocols View (page 27)
.
Menu
Selection
Description
Port Notes
Opens a note pad for your use.
Port Frame &
and Error
Breakdown
Opens the Repeater Port Frame &
Error Breakdown view.
Port Frame Size
& Protocols
Opens the Repeater Port Frame Size &
Protocols view.
Enable/Disable
Port
Opens a dialog box that lets you
enable or disable the port.
Set Port Speed
Opens a dialog box that lets you set
the port speed to Auto, 10 Mbps, or
100 Mbps.
