D e v i c e V i e w s
B a c k p l a n e M o d u l e I c o n S u b v i e w s
S p e c t r u m E n t e r p r i s e M a n a g e r
Page 35
S m a r t S w i t c h 6 0 0 0
Module Identification Labels
These labels provide the following information
that identifies a specific device.
Slot Number
The module’s location in the chassis. Double-click
this area to open the Application view described
under
Applications View (page 38)
.
Model Type
The type of module in the chassis (for example
6E132-25). Double-click this area to open the
Model Information view.
For more information on the Model Information
view, refer to the
SPECTRUM Views
documentation.
Model Name
A user-defined name; otherwise, it defaults to the
IP address. Double-click this area to open the
Device Configuration View (page 47)
.
Backplane Connections Labels
These labels represent the interfaces between the
module and the FTM backplane. The device-
specific Icon Subviews menu selection for these
labels is
Configuration
, which opens a dialog box
that lets you enable or disable the selected port.
Note in
Figure 15
that the Backplane Module icon
has a gray Backplane Connection label (b4),
which corresponds with interface four of the
chassis backplane.
Table 15
describes the possible operational states
of the backplane connections.
Table 15:
Backplane Connection Status
Descriptions
Chassis Information
The Chassis Information panel within the
Backplane Device view provides the same
information as a similar panel in the Chassis
Device view described under
Chassis Information
(page 29)
.
Color
Status
Description
Green
ON Operational
Yellow
NLK
Operational but not linked
Magenta
Test
Operational test
Blue
Off
Operationally and administratively
down
Red
Off
Operationally down but
administratively enabled
Gray
UNK
Unknown
