15
cab - Produkttechnik GmbH
Print Media
Hermes can be operated in direct thermal as well as thermal transfer mode.
For direct thermal mode, only use print material with a thermal-reactive coating.
The print image is transferred by heating the material at the printhead, causing
a reaction on the surface of the paper and, consequently, darkening the
material.
In thermal transfer mode, not only standard paper labels are needed but also
the thermal transfer ribbon with a color surface. The printout is created by
heating the transfer ribbon, causing a transfer of color particles onto the label.
Hermes allows to regulate the heat level and also the print speed. Thus, the
Hermes offers a wide range of opportunities for usage.
Hermes 4N and Hermes 4F are able to print on labels with a maximum supply
roll diameter of 8 in (200 mm) and a core diameter of 3 in (76 mm). Hermes 5N
and Hermes 5F can use labels with a maximum supply roll diameter of 12 in
(300 mm) and a core diameter of 3 in (76 mm).
The ability of label edge recognition, which guarantees the precise position of
the printer output, is accomplished by a moveable photocell. This sensor is
controlled by the processor of the Hermes and ensures recognition for different
sorts of material. There is no need for additional electronic adjustment.
On the following pages, you will find detailed information and specifications
concerning suitable materials.
If in doubt, we will perform test prints with your label material to find the best
suitable transfer ribbon.