12
cab - Produkttechnik GmbH
Processor :
32 Bit, Motorola
Memory :
Internal memory 2 MB
PCMCIA connector :
for PC Card 512 KByte, 2 MByte, 4 MByte
Interface :
Serial : RS-232, RS-422, RS-485 1200-57600 Baud
Parallel : Centronics
Peripheral ports :
- Interface for the connection of non-cab-applicators and
for the signals of the warning sensors label/ribbon end
- SPI-Interface for the connection of cab-applicators
Ribbon saver :
The printhead only will be pressed against the print roller if the printer
has to print information. At the other time the printhead will be lifted
and the transport of the transfer ribbon will be stopped.
Backfeed :
In order to start the print of a label always from the front edge the
label strip may fed back after the completion of the previous label
print.
To avoid an abrasion of the transfer ribbon at the label the printhead
wil be lifted during the backward transport.
Test features :
System test when switching on
Self test with printout of firmware data and system parameters
Label material :
Thermal paper, normal paper, plastic foil,
PE, PP, PVC, Polyamide
Adhesive labels :
60-160 g/sqm
Material width :
4.7 in (120 mm)
Label width :
.4-to 4.5 in (10-116 mm)
Label length :
.2 to 21.5 in (5-546 mm)
Core diameter :
3 in (76 mm)
Supply roll diameter :
Hermes 4N/4F : up to 7.9 in (200 mm)
Hermes 5N/5F : up to 11.8 in (300 mm)
Labels may be wound face-in or face-out on the supply roll
Internal rewinder :
To rewind the backing paper
Core diameter :
1.6" (40 mm)
Max. rewinding diameter :
Hermes 4N/4F : 5.7 in (145 mm)
Hermes 5N/5F : 8.3 in (210 mm)
Material recognition :
- Gap sensor ("see through")
- Bottom reflective sensor
- Top reflective
adjustable from .08 to 1.85 in (2 to 47 mm)
