C2Dx T/PUMP TP700, Руководство по обслуживанию

Страница: 20 / 39

Signature:
Functional checks (Continued)
Complete all the functional tests for the T/Pump
®
Temperature Therapy Pump . If the pump passes all the requirements
of this functional check and safety inspection, the pump should be considered operational and suitable to return to
service.
Functional check setup - Clik-Tite
®
connectors
Note: If the flow meter is connected in reverse, the flow meter will indicate no flow. Reverse the pump connections so
that the male fitting (with black O-ring) is on the supply side.
A
B
C
D
E
Figure 1: Functional check setup for Clik-Tite
®
connectors
1. Plug into a properly grounded outlet (A) ( Figure 1 on page 16 ).
2. Fitting and tube closest to the front of the T/Pump
®
Temperature Therapy Pump (B).
3. Male Clik-Tite
®
connectors (black O-ring) (C).
4. Mul-T-Pad
®
Temperature Therapy Pad , size 18” or 22”: lay the pad flat and at the same level as the pump (D).
5. TPT9 , 7 gph (26.5 lph) minimum. Read at top of the float (E).
Functional check setup - Colder connection
Note: If the flow meter is connected in reverse, the flow meter will indicate no flow. Reverse the pump hose connections
to change the direction of the flow.
101176 Rev 1
Preventive maintenance
16
c2dx.com