C-Tech HTHY-0709, Руководство по эксплуатации продукта

Страница: 21 / 26

- 19 -
Figure 5-10
VI. Operation
1. Connect the power cord and turn on the [power switch] to power up the device.
2. The device automatically enters the [Startup] interface. Check if it displays "device initialization
completed", refer to Figure 5-1. If it is, it means that the device parameter download is ok and you
can proceed to the next step. Otherwise, please check the device communication.
WARNING!
In order to use this equipment safely and correctly, please read the operation
manual carefully.
3. Select the test to be carried out, take out the test piece after heat preservation according to the
test specification, put it on the press, and place the displacement sensor.
4. Click the "Test Start" button, the font of the button changes to red, and the press rises. And
complete the test within the specified test time.
5. After the test is completed, the interface will automatically jump to the [Save] interface. After
selecting the storage area, save the test data, which is convenient for recalling the test data later.