C-Tech HTHY-0709, Руководство по эксплуатации продукта

Страница: 17 / 26

- 15 -
(5) Click the "Exit" button to exit the "System Settings" and return to the "Test" interface.
Parameter Settings interface
In the [Marshall Stability Test] interface shown in Figure 5-4, click the "System Settings" button to
open the [Parameter Settings] interface by default, as shown in Figure 5-5. The description of each
parameter and button is as follows.
Figure 5-5 Parameter settings interface
[Motor loading rate]: The motor loading rate is the operating speed of the press during the test;
[Motor no-load rate]: The motor no-load rate is the operating speed of the press during the no-load
process;
[Maximum pressure]: If the load value of the pressure sensor exceeds this value, the lifter will no
longer rise;
[Parameter download]: After setting the motor loading rate and no-load rate, click this button to make
the parameters take effect;
[Set the x-direction range]: Set the x range of the coordinate axis of the test interface;