C-Tech HTHY-0709, Руководство по эксплуатации продукта

Страница: 15 / 26

- 13 -
[Status Code]: The working status code indicates the current working status of the device or the fault
that has occurred. For details, refer to Appendix 1, or directly query in the system settings;
[Parameter download]: Click this button to transfer the set parameters to the control card. After
changing the parameters, you must perform this operation to make the parameters take effect;
[Return]: Click this button to return to the [Startup] interface.
WARNING!
1. This interface is mainly used for maintenance and testing by engineers,
and does not require users to master it.
2. The user is not allowed to enter and modify the parameters at will,
otherwise the displacement will be inaccurate, which will affect the accuracy
of the test results!
Marshall Stability Test interface
In the [Startup] interface shown in Figure 5-1, click the "Marshall Stability Test" button, the device
enters the [Marshall Stability Test] interface; click the "Splitting Test" button, the device enters the
[Splitting Test] interface;
Since the functions and settings are roughly the same in each test, they both include two parts:
[System Settings] and [Data Processing]. The difference is the test process, test calculation method
and test results. So take the Marshall stability test as an example to explain the operation method
of the instrument software.
[Marshall Stability Test] interface is shown in Figure 5-4. In this interface, the upper right side is the
"load-deformation curve" of the test, the lower right side is the test result, and the left side is the test
function buttons and setting buttons. The description of each parameter and button is as follows.
[Start test]: After clicking this button, the font turns red, and the Marshall stability test starts;
[System Settings]: After clicking this button, enter the "System Settings" interface;
[Save]: After clicking this button, enter the "Data Processing" interface;
[Print]: Click this button to start printing.